Loading And Unloading Of FIBC Container BULK Bags

During filling (loading) or unloading (discharging) bags, all staff should always take the necessary precautions and be aware of the surroundings. All personnel must wear appropriate safety equipment when handling bags (NOTE: This manual is a summary of the FIBCA safety manual for loading and unloading the bag) Safe and successful You must follow and guarantee these best practices:

• The FIBC will use under the SWL and SF which protect your bag affect its strength without damage.

• to fill The bottom removal caps are properly sealed.

• The bag you use is compatible with the packaged product ( hazardous or non-hazardous substances).

• This bag is suitable for filling / pouring (for static electricity solution in flammable or explosive environment).

• The bags are sealed evenly.

• A full bag is always stable.

• the capacity of any hanging device and full bag support was fully evaluated.

• The eyes or upper sleeves are vertical in the bag to prevent damage.

• Hang the bag according to the manufacturer's using instructions.

• Hooks of crane individuals used to lift bags do not have sharp corners.

• After filling, to make sure the bag properly filled and stranded.

• The bag regularly goes up and down.

• Take appropriate measures to control dust around the bag and prevent dust burning.

• All employees are safe and away from potential hazards.

• You follow all the suppliers who deal with the instructions.