4-loop Maxibag 1250kg for Chile Markets

• Fabric Body: White PP 200 gr/m2, with reinforcement in the loop-areas (fabric weight of the reinforcement area, 360 gr/m2 or to be specified by producer).

• Height: 210 cm; Suspended: 235 cm

•  Base: Plain/flat, size 87 x 87cm; all cuts hemmed.

• Top and spout: Polypropylene 150 gr / m2 incl. coating

• Filling spout: Diameter: 43cm - Height: 56 cm.

• Loading height: 210 cm

• Base: Plain 87 x 87 cm

• All cuts hemmed.

• Rafia handles 25 cm long above the bag, width 7cm (+ -0.5), sewn down 40cm

• Shipping-sling in the same material, length 87 cm. Green PP fabric covering the slings, length   

       67cm. 

• Inner bag: Made of plastic tube, made from virgin materials, colorless solution of 400 cm in    

     length  x 200 cm lay-flat width, open at its top, gusseted and sealed to 100 cm width at its 

     bottom,   with a thickness of 50 micron  (0,050mm) 

• Tie-band  inside the filling spout, length 150cm (2x75 cm) sewn in its middle part at the  bottom of  the filling spout.

• Tie-band outside the filling spout, length  150cm (2x75 cm) sewn in its middle part 12cm from the bottom of the filing spout.

• Document pocket: in upper-sealable (zip lock) for requested sheet size (30x25cm)

• PE-film or doc pocket  for barcoding with 2 vertical seams at each end, size 20cmx20cm, thickness 120micron,  located 49cm from the base of bag (See drawing).  NB !!! Altogether 2 pcs of PE-films sewn in diagonally opposite corners of the bag (see special drawing).

• Print: NO PRINT

• Resistance to Ultraviolet Light: 170 KLY / YEAR, fabric body, lid, handles, webbings, doc pockets and yarn.

• UV Stabilization: 2 years.

• Capacity: 1250 Kg.

• Safety factor: 5: 1

• Bag to pre-inflated with liner (blow-folded)