Jumbo Bag 600kgs Red Color Loops With 1-side Logo Printing
| Category | Dimension | Special requirement |
| Body | Width 90 cm. (+-2 cm.) Length 90 cm. (+-2 cm.) Height 130 cm. (+-2 cm.) | 1. Weight per sq.m. 180 g. + RF 20 g 2. Vertical thread 14 filament x Longitudinal 14 filament persq.inch(+/-1) 3. Pass UVB test at 200 hours 4. Made of virgin plastic compound 100% and other composition <13% 5. Even woven without any fluff |
| Bottom Body (Cloth) | Width 90 cm. (+-2 cm.) Length 90 cm. (+-2 cm.) | 1. Weight 160-180 g 2. Non-laminate 3. UV stabilised 4. Petal Design (X Type) with reinforced belt at each of 4 slots for discharge tie |
| Top Base (Cloth) | Width 90 cm. (+-2 cm.) Length 90 cm. (+-2 cm.) | 1. Weight 160-180 g 2. Non-laminate 3. UV stabilised |
| Fill spout | Diameter 60x60cm. (+/-2 cm.) Height 70 cm. (+/-2cm.) | 1. Weight 85-90 g 2. Non-laminate 3. UV-Stabilised |
| Discharge Spout | Diameter 60 cm. x 60 cm. (+/-2 cm.) Height 70 cm. (+/-2 cm.) | 1. Weight 85-90 g 2. Non-laminate 3. UV Stabilised 4. Tie once with rope (Fig. 2) then fold down and wind 2-3 round (Fig. 3) before tie with rope in the bow pattern (Fig. 4) 5. Cover the knot with bottom cloth piece (Fig. 5) |
| Spout tape | Length 60cm. "Width 1.5-2cm. Below the tip of the bag 25cm | 1. Soft type 2. Made of PP yarn or PP Multi-filament (white) |
| Belt loop | Width 6.5 - 7.5 cm. | 1. Loop length from bag body 40 (39-42) cm. 2. Zigzag or slanting woven pattern 3. "M" on "W" sewing line in the RF with 30 cm. depth 4. Red color |
| Belt sling | Width 6.5 - 7.5 cm. | 1. Circle line sewing L/F 33 cm. 2. Race in belt loop with 15 cm. "M" on "W" sewing line 3. Red color |
| Width 30 - 33 cm. Length 43 -46 cm. | 1.2 pcs. In the opposite side 2. Transparent PE type 3. With zipper seal (Fig. 11 ) |
| Label | client | 1. White color 2. Net weight 2,150 g/pcs. +/-100 3.100% virgin plasstic and other composition <13% 4. Safety factor (SF) 5:1 |
| Discharge tie | Diameter 5-6 mm. Total length 230 cm. Distance between terminal knots 20 - 25 cm. Distance between terminal knots and terminal knots 5 -8 cm. (Fig. 9) | 1. Slippery type 2. Insert with one of 2 inch PVE tube, 5 cm. soft PVC Polyester threads tube 3. With 2 knots 20-25 cm. apart (Fig. 10) 4. Put the PVC tube close to the bag bottom and tie the rope as Fig. 6-8 Wind the rope 3 round before tie in bow pattern (Fig. 8) |
| Sewing style | As sample | 1. Bottom + Body (Bottom stich with body). Join face to face and roll out with 3 stich/inch sewing line 2. Body + Top Base (Top base stich with body). One fold out of the body edge before stich with the top base by chain style sewing with PP MultiFilament 3000 Denier .Sewing pleated 7-9 cm in the middle of 4 sides |
| Packaging | on pallets | 1. 100 pcs. per pallet 2. Wooden patllet or cloth wrap paper roll support which is able to handle by forklift truck 3. Able to stack without leaning 4. Identification card with necessary information such as bag type, weight etc. |
| Documentation | A4 size PP+PE | 1. Delivery order, Tax invoice, Invoice 2. Test result and certificate of test 3. Weight report |
